Nail Order gel polish has a cure thickness of 0.1mm, this means each layer should be applied no more than 0.1mm thick. Our gel polish is highly pigmented so a little goes a long way.
Nail Preparation: For maximum adhesion we recommend using a 180 nail file or sanding band to lightly etch the nail plate. A buffer can also be used for client who are more delicate with their nails. We also advise the use of Xprime.
Do not apply any cleansers, dehydrators or acetone to the natural nail after prep as this can over dehydrate the nail and lead to premature lifting of the gel.
On natural nails: After applying a base coat, apply one or two colour coats (depending on desired coverage). Then cure and apply top coat.
On top of enhancements: Gel polish can be applied straight onto the enhncement. Apply one or two coats (depending on desired coverage). Then cure and apply top coat.
Cure for 30 seconds with our LED Lumi Lamp. If using a UV only lamp the gel should be cured for 2 minutes, please note we have not tested any UV only lamp models with our gels but these are the recommendations of our manufacturer. Our recommendation is to use our approved Lumi Lamp.
*Each bottle can achieve 750 coats on a medium length nail*